thinking about installing a 280 watt 24+ volt panel on top of shell on pickup. I was going to use this as additional power and something to move and put in sun if not able to have good exposure on trailer panels.
they have the MC4 connectors and trying to figure how to get the elec back to inverter/charger on trailer.
was guessing I could get length of cable with mc 4 connection and have a lead from inverter to a-frame with hook up. With 9 amps at 31 volts the 10 AWG wire should be good for some 30 ft from panel on truck to inventor.
was also looking at amsolars 35 mm rocker foot mount set mounted on short side of panel to allow for tilting of the panels in winter low sun times.
any hints etc
they have the MC4 connectors and trying to figure how to get the elec back to inverter/charger on trailer.
was guessing I could get length of cable with mc 4 connection and have a lead from inverter to a-frame with hook up. With 9 amps at 31 volts the 10 AWG wire should be good for some 30 ft from panel on truck to inventor.
was also looking at amsolars 35 mm rocker foot mount set mounted on short side of panel to allow for tilting of the panels in winter low sun times.
any hints etc
0 commentaires:
Enregistrer un commentaire