One Button Multiclick Mute Script

Here is an example script that I am using in order to use one button for many things. I have adapted/stolen from everybody else on the forum here, so thank you so much. The only thing not working perfect is mute; I am looking to multi click to mute on and mute off but it's not working correctly. It either won't unmute or will go into Overdub Mode after unmuting, which I don't want. Hoping someone has some ideas. Thanks!


!name Rec3
!sustain 1000
!multiclick 200


Track 3

if mode == reset
Record
end

else if mode == record
Overdub
end

else if mode == overdub
Wait loop
Play
end

else if mode == play
Wait loop
Overdub
endif

else if mode == mute
Play
endif

Label sustain
if sustainCount == 1
Reset
endif

Label click
if clickCount == 1
Mute
endif
end

One Button Multiclick Mute Script

Mainstage 3.3.1 sync issue

Had everything working well with Mobius hosted in 32 Lives - but now MainStage is unable to lock to the tempo sent by Mobius - it initially jumps to the tempo Mobius displays on closing a loop, then jumps around all over the place...

Anyone else able to repeat this issue? Any ideas how to troubleshoot?

Mainstage 3.3.1 sync issue

Drift Resync Frames / Suggested Latency

This relates to a feature request posted below, but I was curious what you folks had these parameter set to?


Drift Resync Frames: 100
Suggested Latency Miliseconds: Empty



---------------------------------
Feature request:
Display a message if Mobius manually resyncs itself due to drift.

This relates to the Global Parameter / Advanced / Drift Resync Frames Parameter.

In helping to track down sync issues & whatnot, it would be wonderful if Mobius would display a message or alert if it resyncs the tracks.

I use Mobius standalone externally synced. Sometimes it feels like my tracks will drift from the metronome and then realign. It would just be nice to have visual confirmation to know if this is Mobius at work or these magical brownies here in Colorado.

Thanks

¡FRO!

Drift Resync Frames / Suggested Latency

TEStest

sdfsdfssdfsdfsdfsdfsdfsdfsdfsdf

TEStest

How can I have the loops start when my host start?

How can I have my loops start with my host starting.
I am able to record and play my loops and I see my host song position in Moebius but I cannot get the loops to start at the spot in the song where I have created those.
Thank you very much for your help

How can I have the loops start when my host start?

Host Sync Stop/Start

Am I correct that this is still the case?


"It is important to note that Mobius does not respond when you stop the host transport. It will continue merrily along playing loops while the host tracks become silent. This will be addressed in a future release"

Host Sync Stop/Start

Record quantization to Cycle instead of beat/bar?

Hi folks, just getting into Mobius these past few days and have it all pretty much set up how I want it.

I have it set to host sync because my first layer is a premade drumloop and I'm using Mobius to add audio from a mixer, my problem is that what I want is for Mobius to start recording at the beginning of the cycle instead of the next beat/bar. Currently have it set to Bar and it's okay but it would be more fluid if the record start/stop would happen on the 1st beat of the cycle no matter when I hit record. This way I can tap record before the drum loop ends and as I begin playing/recording, I can press record again at any time during my loop recording to signal mobius to stop recording at the next loop cycle.

Hope that makes sense,

I've checked through the manual looking for a way but can't seem to find one :confused:

Thanks in adv

Record quantization to Cycle instead of beat/bar?

Help! Blind looper needing help

Hi,

So, yeah, as I'm sure a lot of people did, saw Ed a couple of Sunday's back at Glastonbury and thought, hey, I could do that... I've tried loopers before but, unless I'm using the really limited low end ones that don't have displays, I'm kinda scuppered. I want to loop vocals and guitar and the bigger systems require a visual feedback through an LCD... So, I found out about mobius and thought, gadzooks, this might be it... Next issue is, how I actually do it.

My thinking is, I don't want a vast pedal board, for obvious reasons, counting along pedals with my toe whilst playing and singing could be difficult so, my thought is this, a 3 pedal midi controller such as the UMI3 as well as a series of midi buttons on my acoustic guitar which will be much more accessible.

I did look at the guitar wing, but I don't' believe it works on acoustics, I mean, it can't be fitted... Is it possible to have two different midi sources headed into mobius anyway?

As you can probably gather, I have utterly no idea what I'm talking about so any help would be gratefully received.

O

Help! Blind looper needing help