I'm going to have to bite the bullet and replace my tank monitor system. This week we were out for two days and at the end of our camp out we drained the black and grey water tanks. The bar graphs on the original monitor system didn't change.
The pans (and presumably the tanks) are held in with side-to-side steel bars at the front and rear flanges of the pans and front to rear steel straps, all screwed into the floor and/or frame with screws/bolts. To drop the pans I have to pull the screws. Is there anything else holding the tanks in place? If I pull the screws, bars, and straps, will the pans fall away leaving the tanks hanging by their plumbing? The fresh water tank has a drain valve bolted to the pan with a short piece of hose. Is there enough slack in the fill and pump hoses to drop the tank? What is the connection, if any, from the toilet to the black tank and from the shower and sinks to the grey tank?
Lot of questions, I know. Thanks for any information or process suggestions!
Al
The pans (and presumably the tanks) are held in with side-to-side steel bars at the front and rear flanges of the pans and front to rear steel straps, all screwed into the floor and/or frame with screws/bolts. To drop the pans I have to pull the screws. Is there anything else holding the tanks in place? If I pull the screws, bars, and straps, will the pans fall away leaving the tanks hanging by their plumbing? The fresh water tank has a drain valve bolted to the pan with a short piece of hose. Is there enough slack in the fill and pump hoses to drop the tank? What is the connection, if any, from the toilet to the black tank and from the shower and sinks to the grey tank?
Lot of questions, I know. Thanks for any information or process suggestions!
Al
0 commentaires:
Enregistrer un commentaire