Multiple loops single tracks

jeudi 31 décembre 2015

Hi guys, I tried to look for a topic like this but I didn't find anything...
I'm trying to use multiple loops in a single track and this is what happens:
I record a loop (not in the master track)
I record loop number 2
I come back and play loop number 1 and Mobius plays it just once, then the loop is deleted
Same with loop number 2

I cannot play a loop more than once if I have multiple loops on a track
Anyone with a suggestion?


Multiple loops single tracks

Hi guys, I tried to look for a topic like this but I didn't find anything...
I'm trying to use multiple loops in a single track and this is what happens:
I record a loop (not in the master track)
I record loop number 2
I come back and play loop number 1 and Mobius plays it just once, then the loop is deleted
Same with loop number 2

I cannot play a loop more than once if I have multiple loops on a track
Anyone with a suggestion?


Multiple loops single tracks

Recording activity possible ?

Hi,

Yesterday, I added a couple of buttons, namely 'Start Recording' and 'Stop Recording'.

Do these actually do anything? I pressed start before a short session, then stop, but cannot find the resultant wav file anywhere. I repeated this, followed by 'Save Loop' from the main file menu. Again, nothing.


Recording activity possible ?

Recording activity possible ?

Hi,

Yesterday, I added a couple of buttons, namely 'Start Recording' and 'Stop Recording'.

Do these actually do anything? I pressed start before a short session, then stop, but cannot find the resultant wav file anywhere. I repeated this, followed by 'Save Loop' from the main file menu. Again, nothing.


New User Help

mardi 29 décembre 2015

(short version) I've got stand-along Mobius working and it's recording my guitar that's plugged into the USB audio interface. However, I'd like to record keyboard sounds/samples from an Ableton instrument.

Setup:
- Windows 10
- Lenovo Thinkpad T530
- Audio Interface: Steinberg UR22 - plugged into USB
- Speakers plugged into the UR22 outputs
- MIDI keyboard AKAI MPK 225 - plugged into USB
- Ableton 9 Lite (this is 64 bit running in a separately)
- Guitar is plugged into a UR22 input 1

I'm running Mobius and Ableton separately. I can hear sounds from instruments in Ableton. I can record loops into Mobius from my guitar plugged into the UR22.

I've tried a number of track and configuration settings but can't figure out how to route the sounds from the MIDI keyboard (Ableton) into Mobius.

Or .... am I doing this all wrong? Does Mobius need to be loaded as a VST in order to use sounds in Ableton? In which case, I guess I'd need to reinstall Ableton 32-bit?

Thanks!


New User Help

New User Help

(short version) I've got stand-along Mobius working and it's recording my guitar that's plugged into the USB audio interface. However, I'd like to record keyboard sounds/samples from an Ableton instrument.

Setup:
- Windows 10
- Lenovo Thinkpad T530
- Audio Interface: Steinberg UR22 - plugged into USB
- Speakers plugged into the UR22 outputs
- MIDI keyboard AKAI MPK 225 - plugged into USB
- Ableton 9 Lite (this is 64 bit running in a separately)
- Guitar is plugged into a UR22 input 1

I'm running Mobius and Ableton separately. I can hear sounds from instruments in Ableton. I can record loops into Mobius from my guitar plugged into the UR22.

I've tried a number of track and configuration settings but can't figure out how to route the sounds from the MIDI keyboard (Ableton) into Mobius.

Or .... am I doing this all wrong? Does Mobius need to be loaded as a VST in order to use sounds in Ableton? In which case, I guess I'd need to reinstall Ableton 32-bit?

Thanks!


How do I use Mobius

samedi 26 décembre 2015

Hi. I am totally new to mobius and looping, my plan is to plug my semi - acoustic in to a guitar usb interface intomy laptop, along with a three pedal footswitch and record 4 [max] loops per track. I downloaded Mobius 2 but cannot understand how to work it. Nothing in the button area seems to work. any help would be greatly appreciated.


How do I use Mobius

How do I use Mobius

Hi. I am totally new to mobius and looping, my plan is to plug my semi - acoustic in to a guitar usb interface intomy laptop, along with a three pedal footswitch and record 4 [max] loops per track. I downloaded Mobius 2 but cannot understand how to work it. Nothing in the button area seems to work. any help would be greatly appreciated.


Different time signature loops?

Hey everyone! First newbie question: I need two channels to have different time signatures, I read the starting guide but I couldn't understand how to do this, basically channel one should play 5 beats (subcycles if I understood correctly) and channel two to play 7 but when I try to do it, channel 2 plays like 10 beats, I mean that it plays the 7 beats that I recorded and then 3 of silence but I need it to reach 7 and go back. Is this possible? How is this done? Thanks in advance.


Different time signature loops?

Hey everyone! First newbie question: I need two channels to have different time signatures, I read the starting guide but I couldn't understand how to do this, basically channel one should play 5 beats (subcycles if I understood correctly) and channel two to play 7 but when I try to do it, channel 2 plays like 10 beats, I mean that it plays the 7 beats that I recorded and then 3 of silence but I need it to reach 7 and go back. Is this possible? How is this done? Thanks in advance.


Different time signature loops?

Multitracking in ableton live with mobius

jeudi 24 décembre 2015

Hello everyone,

I've been reading all the documents and threads of circular labs and searching other websites and youtube but I still have no clue of how to do this in ableton live (or even knowing if it's possible).

I want to separate the 4 tracks in mobius in 4 different tracks in ableton live to apply different fxs and instruments in each one.



My objective is to have 4 separate mobius loop tracks in ableton and obviously control their recording/playing with mobius.

I've put the plugin outputs in different channels in mobius, but I have no clue how to send this outputs to the different tracks in ableton live.




Anyone knows how to do this?


Multitracking in ableton live with mobius

Multitracking in ableton live with mobius

Hello everyone,

I've been reading all the documents and threads of circular labs and searching other websites and youtube but I still have no clue of how to do this in ableton live (or even knowing if it's possible).

I want to separate the 4 tracks in mobius in 4 different tracks in ableton live to apply different fxs and instruments in each one.



My objective is to have 4 separate mobius loop tracks in ableton and obviously control their recording/playing with mobius.

I've put the plugin outputs in different channels in mobius, but I have no clue how to send this outputs to the different tracks in ableton live.




Anyone knows how to do this?


track presets not found in vst mode

mercredi 23 décembre 2015

Hello

when working with mobius as a standalone i can recall track setups and midi bindings but when working as a vst in "bidule" this seems not possible. What am i missing?


track presets not found in vst mode

Hello

when working with mobius as a standalone i can recall track setups and midi bindings but when working as a vst in "bidule" this seems not possible. What am i missing?


track presets not found in vst mode

Do you Read Newspaper Daily..?

Hello Friends,

Please tell me, Do you Read Newspaper Daily..?


Event Management Companies in Delhi


Do you Read Newspaper Daily..?

Hello Friends,

Please tell me, Do you Read Newspaper Daily..?


Event Management Companies in Delhi


Do you Read Newspaper Daily..?

Instant Subscription to a Thread That You Have Started

mardi 22 décembre 2015

Hi Guys,

I think this should happen automatically when you start a thread.

Mods, please can you help?


Wedding Planners in Delhi


Instant Subscription to a Thread That You Have Started

Change Username/screenname?

Hi
Who would I contact to change my username/screen name?

Many Thanks


Wedding Planners in Delhi


Change Username/screenname?

Instant Subscription to a Thread That You Have Started

Hi Guys,

I think this should happen automatically when you start a thread.

Mods, please can you help?


Wedding Planners in Delhi


Change Username/screenname?

Hi
Who would I contact to change my username/screen name?

Many Thanks


Wedding Planners in Delhi


Mute whilst in overdub - bug?

vendredi 18 décembre 2015

Hi folks

Just recently reminded myself of a seemingly inconsistent behaviour, & wondered if anyone else had encountered it; is it a bug? Or am I being perverse?

I frequently use one or two tracks on mobius as single repeat delays. Secondary feedback is enabled, but set to zero (primary feedback is at 127), so when in overdub mode, the audio will be repeated once, then disappear. The result is a kind of canon.

If I mute the track for a while, then perhaps half-a-dozen cycles later unmute it, I get a wall of half-a-dozen full volume overdubs for one cycle until it returns to the one repeat canon thing; it's been overdubbing at level 127 whilst in mute mode.

I suspect it is something in the way secondary feedback & mute are interacting (I haven't experimented with the same procedure on 'normal' feedback with secondary disabled, because I've used the setup this way for years now). It's no biggie - I can do a script workaround - but it's such a strange change of behaviour (I assume mute simply mutes the output of the track), I don't see why it would cause the feedback level to suddenly jump to max, then back again. It just might qualify as a bug. Then again, maybe it's the regular feedback that's doing it, and meant to be.

Dave


Mute whilst in overdub - bug?

Mute whilst in overdub - bug?

Hi folks

Just recently reminded myself of a seemingly inconsistent behaviour, & wondered if anyone else had encountered it; is it a bug? Or am I being perverse?

I frequently use one or two tracks on mobius as single repeat delays. Secondary feedback is enabled, but set to zero (primary feedback is at 127), so when in overdub mode, the audio will be repeated once, then disappear. The result is a kind of canon.

If I mute the track for a while, then perhaps half-a-dozen cycles later unmute it, I get a wall of half-a-dozen full volume overdubs for one cycle until it returns to the one repeat canon thing; it's been overdubbing at level 127 whilst in mute mode.

I suspect it is something in the way secondary feedback & mute are interacting (I haven't experimented with the same procedure on 'normal' feedback with secondary disabled, because I've used the setup this way for years now). It's no biggie - I can do a script workaround - but it's such a strange change of behaviour (I assume mute simply mutes the output of the track), I don't see why it would cause the feedback level to suddenly jump to max, then back again. It just might qualify as a bug. Then again, maybe it's the regular feedback that's doing it, and meant to be.

Dave


Does Anyone Follow Bollywood Horror Movies?

Does Anyone Follow Bollywood Horror Movies? What,s you favorite horror movies in Bollywood.


Maharaja Express Route Map


Does Anyone Follow Bollywood Horror Movies?

Does Anyone Follow Bollywood Horror Movies? What,s you favorite horror movies in Bollywood.


Maharaja Express Route Map


Does Anyone Follow Bollywood Horror Movies?

syncing with reason

mardi 15 décembre 2015

Hi,

What would be the easiest way to put a click track into a loop, something I can set to a specific tempo, then transfer out to other applications?

I've been experimenting but I am having trouble understanding the syncing documentation. I end up with dead sounds in my loops and such.

Specifically, I am using Propellerhead's Reason to create beats and I would like to put a beat into one of the tracks (set to a tempo), and loop various things within the various tracks over it and then transfer it to pro tools for further editing, where I would assume if would fit with my tempo there.

Any help would be much appreciated.

Thanks
jessej


syncing with reason

Hi,

What would be the easiest way to put a click track into a loop, something I can set to a specific tempo, then transfer out to other applications?

I've been experimenting but I am having trouble understanding the syncing documentation. I end up with dead sounds in my loops and such.

Specifically, I am using Propellerhead's Reason to create beats and I would like to put a beat into one of the tracks (set to a tempo), and loop various things within the various tracks over it and then transfer it to pro tools for further editing, where I would assume if would fit with my tempo there.

Any help would be much appreciated.

Thanks
jessej


syncing with reason

Google is so Popular

lundi 14 décembre 2015

Google places ranking sites with its relevant topics. It is rectified with the link associated with main site and up to subject’s significance. The most recognized site that consorts to your site, the best Google ranking you gets.

Google’s search engine was accurate for a long time. With their frequent algorithm updates that increased the accuracy of the search engine results pages (SERPs) even further, it’s no wonder why they became “the most popular search engine in the world”.

However, these days, depending on your search queries, you may find that Bing or Yahoo are more accurate, although few people can be bothered to switch from Google.


SSC


Google is so Popular

Google is so Popular

Google places ranking sites with its relevant topics. It is rectified with the link associated with main site and up to subject’s significance. The most recognized site that consorts to your site, the best Google ranking you gets.

Google’s search engine was accurate for a long time. With their frequent algorithm updates that increased the accuracy of the search engine results pages (SERPs) even further, it’s no wonder why they became “the most popular search engine in the world”.

However, these days, depending on your search queries, you may find that Bing or Yahoo are more accurate, although few people can be bothered to switch from Google.


SSC


Going through all loops in a track

dimanche 13 décembre 2015

Hi there,
New to the forum here. I've been toying with Mobius for a while, but recently I got Lemur and I'm going deep into both to make a controller for my tablet tailored to my workflow, including extensive midi feedback... the final objective being not having to check the actual mobius gui at all. After quite a few hours and some scripting on both ends it's coming along surprisingly nicely.

My question would be: I'm trying to collect some info for each loop in a track, specifically if they are empty or not, and if not getting their length, but after some time with the documentation and the search funcion in this forum I haven't found a way... surely there's an obvious way to cycle through all loops in a track, but at this point it eludes me... any ideas?


Going through all loops in a track

Going through all loops in a track

Hi there,
New to the forum here. I've been toying with Mobius for a while, but recently I got Lemur and I'm going deep into both to make a controller for my tablet tailored to my workflow, including extensive midi feedback... the final objective being not having to check the actual mobius gui at all. After quite a few hours and some scripting on both ends it's coming along surprisingly nicely.

My question would be: I'm trying to collect some info for each loop in a track, specifically if they are empty or not, and if not getting their length, but after some time with the documentation and the search funcion in this forum I haven't found a way... surely there's an obvious way to cycle through all loops in a track, but at this point it eludes me... any ideas?


How do you work this thing?

samedi 12 décembre 2015

Hello. I want to try making math rock with electronics, turntablism, ableton push 2,modular synths.Upon searching for the echoplex I found out about this and could use some tip's on how to get started. Like using it with ableton and why all of a sudden when I press record I can't seem to finish the recording when I press again.

Cheers

samdrone


How do you work this thing?

Hello. I want to try making math rock with electronics, turntablism, ableton push 2,modular synths.Upon searching for the echoplex I found out about this and could use some tip's on how to get started. Like using it with ableton and why all of a sudden when I press record I can't seem to finish the recording when I press again.

Cheers

samdrone


How do you work this thing?

Advertising Section?

May be there can be a section on the forum where people's service areas are where they live and can post a link to their website with a little information about their business. Im just saying this because i just noticed there was a wanted section so why not an advertisement section?


Solar PCU


Advertising Section?

May be there can be a section on the forum where people's service areas are where they live and can post a link to their website with a little information about their business. Im just saying this because i just noticed there was a wanted section so why not an advertisement section?


Solar PCU


Advertising Section?

Quantised / Unquantised

mercredi 9 décembre 2015

Hello,

I'm returning to Möbius after a bit of a break. It's sad how much I've forgotten after 5 years!

I need to be able to mix quantised and unquantised functions easily. For instance, I'd like to have the option to use quantised sus replace/substitute, unquantised insert, unrounded multiply, etc., all within the same preset. Will the available functions allow me to do this, or will I need to use scripts?

Ta,

Stephen


Quantised / Unquantised

Hello,

I'm returning to Möbius after a bit of a break. It's sad how much I've forgotten after 5 years!

I need to be able to mix quantised and unquantised functions easily. For instance, I'd like to have the option to use quantised sus replace/substitute, unquantised insert, unrounded multiply, etc., all within the same preset. Will the available functions allow me to do this, or will I need to use scripts?

Ta,

Stephen


Quantised / Unquantised

64 bit?

mardi 8 décembre 2015

Sorry if this has been answered but I searched the forum and didn't see anything recent. Are there plans to release a 64 bit version of Mobius? jbridge seems to be unstable in Ableton. Thanks


64 bit?

64 bit?

Sorry if this has been answered but I searched the forum and didn't see anything recent. Are there plans to release a 64 bit version of Mobius? jbridge seems to be unstable in Ableton. Thanks


Newbie/Mobius/Ableton/the struggle

dimanche 6 décembre 2015

Hello. Mobius seems like it could be really anything you would need in a looper. But with all that flexibility comes a steep learning curve. I'm new to Ableton and Mobius. In Ableton I can loop almost like I want just in clip view but it lacks certain functions like undo, reverse etc. All I need is 4 tracks to loop on with some stacking ability..maybe eventually series if I can set it up. But I cant even get a basic looper set up in Mobius much less to get it working in Ableton...the one midi binding i made(one button to start recording and another push to stop recording on loop one) is gone when I go into the VST. There are so many options I don't know where to start. I've been reading the manual(not the whole thing yet..its huge) Just wondering if there is a basic explanation in detail of how to set up mobius just to be like a basic mulitrack looper like the boomerang? Mobius really seems great but i'm my wits end.Thanks in advance for any help.

REVISED: Basic Boomerang operation in parallel.
All four tracks sync to a master loop.(in my case it will be Ableton)
Everything is quantized in equal divisions.
Press loop one and play your instrument/ press loop one again to stop recording and the loop starts playing. then you can add layers to that by selecting "stack" with a different button and pressing the active loop button. Pressing the button again stops the loop..

When you press record on you second loop track(no matter when) it starts recording at the beginning of the bar of the first loop.

All loops act the same but can be of different lengths but they all quantize.

Holding Down a loop button while its not playing erases the loop.

there is a stop all and start all button to stop and start all loops together independent of the master clock start and stop.

the master start and stop from ableton would override this ^^^^

In series mode

press loop one/play/press loop two and record to loop two.(loop one stops playing when you move to loop two. then you can stack on these loops if you want and toggle between them. up to four different tracks if you want)


Newbie/Mobius/Ableton/the struggle

Hello. Mobius seems like it could be really anything you would need in a looper. But with all that flexibility comes a steep learning curve. I'm new to Ableton and Mobius. In Ableton I can loop almost like I want just in clip view but it lacks certain functions like undo, reverse etc. All I need is 4 tracks to loop on with some stacking ability..maybe eventually series if I can set it up. But I cant even get a basic looper set up in Mobius much less to get it working in Ableton...the one midi binding i made(one button to start recording and another push to stop recording on loop one) is gone when I go into the VST. There are so many options I don't know where to start. I've been reading the manual(not the whole thing yet..its huge) Just wondering if there is a basic explanation in detail of how to set up mobius just to be like a basic mulitrack looper like the boomerang? Mobius really seems great but i'm my wits end.Thanks in advance for any help.

REVISED: Basic Boomerang operation in parallel.
All four tracks sync to a master loop.(in my case it will be Ableton)
Everything is quantized in equal divisions.
Press loop one and play your instrument/ press loop one again to stop recording and the loop starts playing. then you can add layers to that by selecting "stack" with a different button and pressing the active loop button. Pressing the button again stops the loop..

When you press record on you second loop track(no matter when) it starts recording at the beginning of the bar of the first loop.

All loops act the same but can be of different lengths but they all quantize.

Holding Down a loop button while its not playing erases the loop.

there is a stop all and start all button to stop and start all loops together independent of the master clock start and stop.

the master start and stop from ableton would override this ^^^^

In series mode

press loop one/play/press loop two and record to loop two.(loop one stops playing when you move to loop two. then you can stack on these loops if you want and toggle between them. up to four different tracks if you want)


Newbie/Mobius/Ableton/the struggle

Global Mute Script

Is there any way of making a global mute now script? What I mean by this is you press to mute all tracks and it does it instantly rather than waiting for the whole loop to go round and the same for unmute, is there any way of doing this?
Thanks, Ed :)


Global Mute Script

Global Mute Script

Is there any way of making a global mute now script? What I mean by this is you press to mute all tracks and it does it instantly rather than waiting for the whole loop to go round and the same for unmute, is there any way of doing this?
Thanks, Ed :)


Script for a song not working

samedi 5 décembre 2015

I'm working on making a script for a live song I'm planning on performing, where certain tracks need to be recorded, overdubbed, muted, etc.
I made a script that works fine to switch tracks and record, but I'm having trouble making the script start recording and mute a track at the same time. Whenever try to do this, it mutes the track, waits a loop, and then starts recording the new track.
Here's the script I'm having trouble with:

!name looping song
!quantize loop

Track3
record
wait loop
overdub
wait loop
overdubOff
Track4
record
wait loop
Track3
mute
Track5
record


The intention is to mute track 3 and start recording track 5 at the same time, but it isn't working right :eek:. Any help solving this problem would be greatly appreciated!


Script for a song not working

I'm working on making a script for a live song I'm planning on performing, where certain tracks need to be recorded, overdubbed, muted, etc.
I made a script that works fine to switch tracks and record, but I'm having trouble making the script start recording and mute a track at the same time. Whenever try to do this, it mutes the track, waits a loop, and then starts recording the new track.
Here's the script I'm having trouble with:

!name looping song
!quantize loop

Track3
record
wait loop
overdub
wait loop
overdubOff
Track4
record
wait loop
Track3
mute
Track5
record


The intention is to mute track 3 and start recording track 5 at the same time, but it isn't working right :eek:. Any help solving this problem would be greatly appreciated!


Script for a song not working

Hello New user here (boomerang guy)

vendredi 4 décembre 2015

Hello. I just installed mobius. I am a multi instrumentalist and electronic musician currently using a hardware setup devices and lots of cabling and a large pedalboard. I have a couple of months off this winter and I'm considering taking that time to revamp my entire rig and change my approach. My goal would be to use Mobius inside of Ableton and have it synced up with clips and effects within Ableton. I'm looking at the soft step as a controller but would be open to other ideas.

What I would like to do Is set Mobius up to behave like the boomerang 3 in all of its modes. From there I would like to expand its features beyond that but based on the general boomerang workflow which I feel is perfect for me. So I'm wondering if anyone has come up with a way to configure Mobius to work like the boomerang? Thanks for any help anyone might have.


Hello New user here (boomerang guy)

Hello New user here (boomerang guy)

Hello. I just installed mobius. I am a multi instrumentalist and electronic musician currently using a hardware setup devices and lots of cabling and a large pedalboard. I have a couple of months off this winter and I'm considering taking that time to revamp my entire rig and change my approach. My goal would be to use Mobius inside of Ableton and have it synced up with clips and effects within Ableton. I'm looking at the soft step as a controller but would be open to other ideas.

What I would like to do Is set Mobius up to behave like the boomerang 3 in all of its modes. From there I would like to expand its features beyond that but based on the general boomerang workflow which I feel is perfect for me. So I'm wondering if anyone has come up with a way to configure Mobius to work like the boomerang? Thanks for any help anyone might have.


Mobius in Mainstage

jeudi 3 décembre 2015

I have encountered an issue hosting Mobius on mainstage that I don't believe i have seen elsewhere on the forums.

i have Mobius set as an instrument track side chained to bus 1. mobius reads the audio input, and i can record a loop, however, the loop only plays once. the green circle keeps on spinning, but there is no output.

I'v been tackling problem after problem setting up the software, and I believe that this may be the last hurdle, so any help would be greatly appreciated


Mobius in Mainstage

Mobius in Mainstage

I have encountered an issue hosting Mobius on mainstage that I don't believe i have seen elsewhere on the forums.

i have Mobius set as an instrument track side chained to bus 1. mobius reads the audio input, and i can record a loop, however, the loop only plays once. the green circle keeps on spinning, but there is no output.

I'v been tackling problem after problem setting up the software, and I believe that this may be the last hurdle, so any help would be greatly appreciated


Sript program change

mercredi 2 décembre 2015

Hello to all of you . A question. You can make a script for program change ? Mobius use as plugins in Logic Pro X 1.2 . Mobius use the master track output . I wanted to make a script that changes me the sounds in Logic Pro X . Thank you.


Sript program change

Sript program change

Hello to all of you . A question. You can make a script for program change ? Mobius use as plugins in Logic Pro X 1.2 . Mobius use the master track output . I wanted to make a script that changes me the sounds in Logic Pro X . Thank you.


Ableton with Mobius??

mardi 1 décembre 2015

Hi, I have recently decided to upgrade to Ableton with the Mobius.vst plugin, how do I sync my four tracks on Mobius with the audio tracks on Ableton? Can't find an easy way to do it!
Thanks in advance, Ed :)


Ableton with Mobius??

Ableton with Mobius??

Hi, I have recently decided to upgrade to Ableton with the Mobius.vst plugin, how do I sync my four tracks on Mobius with the audio tracks on Ableton? Can't find an easy way to do it!
Thanks in advance, Ed :)


 

Lorem

Ipsum

Dolor