Mainstage sync problem
lundi 25 avril 2016
Hi,
I'm using mobius for some months now, and I can figure out most of my problems on my own searching the documentation or the forum. But there are still some issues... first my setup: Mainstage 3.2.2 with Mobius 2.5 AU plugin via 32Lives on a laptop running OSX Yosemite.
I know that it is not possible to use multiple inputs with Mainstage, so i tried to use two instances of the Mobius plugin with different busses routed to the sidechain input of an instance. In the beginning it seemed to work as intended - both instances of Mobius behaved as if there were one loop machine, but recorded only the bus i sent. But at some point I can't really determine, there seems to be a sync problem.
I mostly use host sync (to bar), and Mobius recognizes it correctly. But it starts to record (or play, or mute...) a beat early, so Mobius starts on the 4 of a bar.
Is there any chance to get rid of that behavior? I think it is not advisable to use multiple instances of Mobius, since it works perfectly as long as I use only one instance, is it?
Thx in advance!
I'm using mobius for some months now, and I can figure out most of my problems on my own searching the documentation or the forum. But there are still some issues... first my setup: Mainstage 3.2.2 with Mobius 2.5 AU plugin via 32Lives on a laptop running OSX Yosemite.
I know that it is not possible to use multiple inputs with Mainstage, so i tried to use two instances of the Mobius plugin with different busses routed to the sidechain input of an instance. In the beginning it seemed to work as intended - both instances of Mobius behaved as if there were one loop machine, but recorded only the bus i sent. But at some point I can't really determine, there seems to be a sync problem.
I mostly use host sync (to bar), and Mobius recognizes it correctly. But it starts to record (or play, or mute...) a beat early, so Mobius starts on the 4 of a bar.
Is there any chance to get rid of that behavior? I think it is not advisable to use multiple instances of Mobius, since it works perfectly as long as I use only one instance, is it?
Thx in advance!
Mainstage sync problem
Hi,
I'm using mobius for some months now, and I can figure out most of my problems on my own searching the documentation or the forum. But there are still some issues... first my setup: Mainstage 3.2.2 with Mobius 2.5 AU plugin via 32Lives on a laptop running OSX Yosemite.
I know that it is not possible to use multiple inputs with Mainstage, so i tried to use two instances of the Mobius plugin with different busses routed to the sidechain input of an instance. In the beginning it seemed to work as intended - both instances of Mobius behaved as if there were one loop machine, but recorded only the bus i sent. But at some point I can't really determine, there seems to be a sync problem.
I mostly use host sync (to bar), and Mobius recognizes it correctly. But it starts to record (or play, or mute...) a beat early, so Mobius starts on the 4 of a bar.
Is there any chance to get rid of that behavior? I think it is not advisable to use multiple instances of Mobius, since it works perfectly as long as I use only one instance, is it?
Thx in advance!
I'm using mobius for some months now, and I can figure out most of my problems on my own searching the documentation or the forum. But there are still some issues... first my setup: Mainstage 3.2.2 with Mobius 2.5 AU plugin via 32Lives on a laptop running OSX Yosemite.
I know that it is not possible to use multiple inputs with Mainstage, so i tried to use two instances of the Mobius plugin with different busses routed to the sidechain input of an instance. In the beginning it seemed to work as intended - both instances of Mobius behaved as if there were one loop machine, but recorded only the bus i sent. But at some point I can't really determine, there seems to be a sync problem.
I mostly use host sync (to bar), and Mobius recognizes it correctly. But it starts to record (or play, or mute...) a beat early, so Mobius starts on the 4 of a bar.
Is there any chance to get rid of that behavior? I think it is not advisable to use multiple instances of Mobius, since it works perfectly as long as I use only one instance, is it?
Thx in advance!
Mainstage sync problem
Mobius and Usine, strange thing happening
I use Audiomulch and I'm testing Usine.
Both take the mobius' dll from the same folder.
There's a weird thing happening: when Audiomulch opens the same Mobius configuration I get when I open Mbius standalone, Usine opens andother one, as it was picking the .dll from another location where there's a fifferent mobius.xml and mobius.ui file.
Where should I look to find the magic trick ?
thanks !
Both take the mobius' dll from the same folder.
There's a weird thing happening: when Audiomulch opens the same Mobius configuration I get when I open Mbius standalone, Usine opens andother one, as it was picking the .dll from another location where there's a fifferent mobius.xml and mobius.ui file.
Where should I look to find the magic trick ?
thanks !
Mobius and Usine, strange thing happening
Mobius and Usine, strange thing happening
I use Audiomulch and I'm testing Usine.
Both take the mobius' dll from the same folder.
There's a weird thing happening: when Audiomulch opens the same Mobius configuration I get when I open Mbius standalone, Usine opens andother one, as it was picking the .dll from another location where there's a fifferent mobius.xml and mobius.ui file.
Where should I look to find the magic trick ?
thanks !
Both take the mobius' dll from the same folder.
There's a weird thing happening: when Audiomulch opens the same Mobius configuration I get when I open Mbius standalone, Usine opens andother one, as it was picking the .dll from another location where there's a fifferent mobius.xml and mobius.ui file.
Where should I look to find the magic trick ?
thanks !
Switching ableton effects while using mobius
vendredi 22 avril 2016
Hi everyone,
I'm using the keyboard to change fxs in ableton live and control mobius too. But everytime I'm in mobius and I want to change an effect in ableton I have to minimize mobius, maximize ableton, switch the effect and return to mobius.
Is there any way to be able to control the fx switching and mobius functions at the same time with the keyboard?
Thank you in advance.
I'm using the keyboard to change fxs in ableton live and control mobius too. But everytime I'm in mobius and I want to change an effect in ableton I have to minimize mobius, maximize ableton, switch the effect and return to mobius.
Is there any way to be able to control the fx switching and mobius functions at the same time with the keyboard?
Thank you in advance.
Switching ableton effects while using mobius
Switching ableton effects while using mobius
Hi everyone,
I'm using the keyboard to change fxs in ableton live and control mobius too. But everytime I'm in mobius and I want to change an effect in ableton I have to minimize mobius, maximize ableton, switch the effect and return to mobius.
Is there any way to be able to control the fx switching and mobius functions at the same time with the keyboard?
Thank you in advance.
I'm using the keyboard to change fxs in ableton live and control mobius too. But everytime I'm in mobius and I want to change an effect in ableton I have to minimize mobius, maximize ableton, switch the effect and return to mobius.
Is there any way to be able to control the fx switching and mobius functions at the same time with the keyboard?
Thank you in advance.
What I would do with Logic Pro X and Mobius .
lundi 18 avril 2016
https://www.youtube.com/watch?v=2c3J...ature=youtu.be
I do not speak english. So I can not explain what I would do with Logic Pro X and Mobius . Once I succeeded. But now I can only Reaper . I enclose a video . What you see in the video I want to do with Logic Pro X. Use 32 Lives and works well as Mobius Logic Pro plugin X. But I do what I see in the video . Will you help me please ? Thank you
I do not speak english. So I can not explain what I would do with Logic Pro X and Mobius . Once I succeeded. But now I can only Reaper . I enclose a video . What you see in the video I want to do with Logic Pro X. Use 32 Lives and works well as Mobius Logic Pro plugin X. But I do what I see in the video . Will you help me please ? Thank you
What I would do with Logic Pro X and Mobius .
https://www.youtube.com/watch?v=2c3J...ature=youtu.be
I do not speak english. So I can not explain what I would do with Logic Pro X and Mobius . Once I succeeded. But now I can only Reaper . I enclose a video . What you see in the video I want to do with Logic Pro X. Use 32 Lives and works well as Mobius Logic Pro plugin X. But I do what I see in the video . Will you help me please ? Thank you
I do not speak english. So I can not explain what I would do with Logic Pro X and Mobius . Once I succeeded. But now I can only Reaper . I enclose a video . What you see in the video I want to do with Logic Pro X. Use 32 Lives and works well as Mobius Logic Pro plugin X. But I do what I see in the video . Will you help me please ? Thank you
What I would do with Logic Pro X and Mobius .
Odd one...Mute in Reaper causes Pause in Mobius??
samedi 16 avril 2016
Hi,
I'm using Mobius plugin in Reaper 32bit v5.16 and oddly, when I press the Mute button on the Reaper track that is hosting the Mobius plugin, it causes the Pause to be activated in Mobius!?
This is really annoying of course because the Pause function in Reaper freezes the loop while Reaper keeps playing, so when I un-Mute Reaper, the Mobius loop restarts where from where it was paused and therefore has completely lost the sync!?
If at least Mobius went into Mute mode which is identical to Mute in Reaper, it would be ok (although unnecessary of course...muting once in Reaper and again in Mobius, overkill).
Is this a bug or is there a way to fix this??
Thanks in advance!
Chumbo
I'm using Mobius plugin in Reaper 32bit v5.16 and oddly, when I press the Mute button on the Reaper track that is hosting the Mobius plugin, it causes the Pause to be activated in Mobius!?
This is really annoying of course because the Pause function in Reaper freezes the loop while Reaper keeps playing, so when I un-Mute Reaper, the Mobius loop restarts where from where it was paused and therefore has completely lost the sync!?
If at least Mobius went into Mute mode which is identical to Mute in Reaper, it would be ok (although unnecessary of course...muting once in Reaper and again in Mobius, overkill).
Is this a bug or is there a way to fix this??
Thanks in advance!
Chumbo
Odd one...Mute in Reaper causes Pause in Mobius??
Hi,
I'm using Mobius plugin in Reaper 32bit v5.16 and oddly, when I press the Mute button on the Reaper track that is hosting the Mobius plugin, it causes the Pause to be activated in Mobius!?
This is really annoying of course because the Pause function in Reaper freezes the loop while Reaper keeps playing, so when I un-Mute Reaper, the Mobius loop restarts where from where it was paused and therefore has completely lost the sync!?
If at least Mobius went into Mute mode which is identical to Mute in Reaper, it would be ok (although unnecessary of course...muting once in Reaper and again in Mobius, overkill).
Is this a bug or is there a way to fix this??
Thanks in advance!
Chumbo
I'm using Mobius plugin in Reaper 32bit v5.16 and oddly, when I press the Mute button on the Reaper track that is hosting the Mobius plugin, it causes the Pause to be activated in Mobius!?
This is really annoying of course because the Pause function in Reaper freezes the loop while Reaper keeps playing, so when I un-Mute Reaper, the Mobius loop restarts where from where it was paused and therefore has completely lost the sync!?
If at least Mobius went into Mute mode which is identical to Mute in Reaper, it would be ok (although unnecessary of course...muting once in Reaper and again in Mobius, overkill).
Is this a bug or is there a way to fix this??
Thanks in advance!
Chumbo
Odd one...Mute in Reaper causes Pause in Mobius??
Standalone configurations not saving
vendredi 15 avril 2016
Hello all,
I just got a new computer (it's a desktop built by a local shop running win 10) and I have not been able to store changes that I make in Mobius. When I close and reopen Mobius, my presets, track set ups, and changes to the UI are gone.
When installing I saved everything to the default location and have been trying to run like I did with my old computer. My C: drive containing Mobius is an SSD but I have noticed that saved projects default to my HDD which I think may be part of this.
Any ideas?
I just got a new computer (it's a desktop built by a local shop running win 10) and I have not been able to store changes that I make in Mobius. When I close and reopen Mobius, my presets, track set ups, and changes to the UI are gone.
When installing I saved everything to the default location and have been trying to run like I did with my old computer. My C: drive containing Mobius is an SSD but I have noticed that saved projects default to my HDD which I think may be part of this.
Any ideas?
Standalone configurations not saving
Hello all,
I just got a new computer (it's a desktop built by a local shop running win 10) and I have not been able to store changes that I make in Mobius. When I close and reopen Mobius, my presets, track set ups, and changes to the UI are gone.
When installing I saved everything to the default location and have been trying to run like I did with my old computer. My C: drive containing Mobius is an SSD but I have noticed that saved projects default to my HDD which I think may be part of this.
Any ideas?
I just got a new computer (it's a desktop built by a local shop running win 10) and I have not been able to store changes that I make in Mobius. When I close and reopen Mobius, my presets, track set ups, and changes to the UI are gone.
When installing I saved everything to the default location and have been trying to run like I did with my old computer. My C: drive containing Mobius is an SSD but I have noticed that saved projects default to my HDD which I think may be part of this.
Any ideas?
Standalone configurations not saving
Trouble shooting help needed!
jeudi 14 avril 2016
Hello all,
I've been using Mobius as stand-alone quite seamlessly for 5 months or so now playing for my wife's flow yoga class that she teaches. Works great--till this morning! I couldn't get anything to work. My 2 org nanos would not work, I could not load any of my loops, could not get any level from the guitar. Total shut down. Could not even get the screen buttons to respond to the mouse. All of my midi setup patches were visible, and the Korg nanos were visible in the midi devices window.
Seems like it must be some simple obvious thing that my relative inexperience can't see.
I'm using a MacAir, Nano pad and Nano Kontrol, Alesis iO interface, and a zoom effects pedal.
Would love any advice or observations.
-Matt
I've been using Mobius as stand-alone quite seamlessly for 5 months or so now playing for my wife's flow yoga class that she teaches. Works great--till this morning! I couldn't get anything to work. My 2 org nanos would not work, I could not load any of my loops, could not get any level from the guitar. Total shut down. Could not even get the screen buttons to respond to the mouse. All of my midi setup patches were visible, and the Korg nanos were visible in the midi devices window.
Seems like it must be some simple obvious thing that my relative inexperience can't see.
I'm using a MacAir, Nano pad and Nano Kontrol, Alesis iO interface, and a zoom effects pedal.
Would love any advice or observations.
-Matt
Trouble shooting help needed!
Trouble shooting help needed!
Hello all,
I've been using Mobius as stand-alone quite seamlessly for 5 months or so now playing for my wife's flow yoga class that she teaches. Works great--till this morning! I couldn't get anything to work. My 2 org nanos would not work, I could not load any of my loops, could not get any level from the guitar. Total shut down. Could not even get the screen buttons to respond to the mouse. All of my midi setup patches were visible, and the Korg nanos were visible in the midi devices window.
Seems like it must be some simple obvious thing that my relative inexperience can't see.
I'm using a MacAir, Nano pad and Nano Kontrol, Alesis iO interface, and a zoom effects pedal.
Would love any advice or observations.
-Matt
I've been using Mobius as stand-alone quite seamlessly for 5 months or so now playing for my wife's flow yoga class that she teaches. Works great--till this morning! I couldn't get anything to work. My 2 org nanos would not work, I could not load any of my loops, could not get any level from the guitar. Total shut down. Could not even get the screen buttons to respond to the mouse. All of my midi setup patches were visible, and the Korg nanos were visible in the midi devices window.
Seems like it must be some simple obvious thing that my relative inexperience can't see.
I'm using a MacAir, Nano pad and Nano Kontrol, Alesis iO interface, and a zoom effects pedal.
Would love any advice or observations.
-Matt
Can't find VST & AU files on the Plugins Folder on OSX El Capitan
vendredi 8 avril 2016
Hi I'm new to Mobius and I'm loving it but now I found a problem.
Until now I only used it as a standalone application but now I was trying to start using it as a plugin to MainStage 3 but I can't find the plugin files.
I tried reinstalling Mobius but the files are still not there :confused: What am I doing wrong?
Thanks for your help,
DiogoAAlexandre
Until now I only used it as a standalone application but now I was trying to start using it as a plugin to MainStage 3 but I can't find the plugin files.
I tried reinstalling Mobius but the files are still not there :confused: What am I doing wrong?
Thanks for your help,
DiogoAAlexandre
Can't find VST & AU files on the Plugins Folder on OSX El Capitan
Can't find VST & AU files on the Plugins Folder on OSX El Capitan
Hi I'm new to Mobius and I'm loving it but now I found a problem.
Until now I only used it as a standalone application but now I was trying to start using it as a plugin to MainStage 3 but I can't find the plugin files.
I tried reinstalling Mobius but the files are still not there :confused: What am I doing wrong?
Thanks for your help,
DiogoAAlexandre
Until now I only used it as a standalone application but now I was trying to start using it as a plugin to MainStage 3 but I can't find the plugin files.
I tried reinstalling Mobius but the files are still not there :confused: What am I doing wrong?
Thanks for your help,
DiogoAAlexandre
A/B looper
jeudi 7 avril 2016
Is there a way to make mobius like an A/B looper?
Verse and chorus?
I have a KMI Softstep.
How do I make pedal 2:
mute track 1 or stop (and reset to start) track 1 and start recording an new loop of desired length (pressing again to stop loop length)
Jay
Verse and chorus?
I have a KMI Softstep.
How do I make pedal 2:
mute track 1 or stop (and reset to start) track 1 and start recording an new loop of desired length (pressing again to stop loop length)
Jay
A/B looper
A/B looper
Is there a way to make mobius like an A/B looper?
Verse and chorus?
I have a KMI Softstep.
How do I make pedal 2:
mute track 1 or stop (and reset to start) track 1 and start recording an new loop of desired length (pressing again to stop loop length)
Jay
Verse and chorus?
I have a KMI Softstep.
How do I make pedal 2:
mute track 1 or stop (and reset to start) track 1 and start recording an new loop of desired length (pressing again to stop loop length)
Jay
A/B looper
mercredi 6 avril 2016
Is there a way to make mobius like an A/B looper?
Verse and chorus?
I have a KMI Softstep.
How do I make pedal 2:
mute track 1 or stop (and reset to start) track 1 and start recording an new loop of desired length (pressing again to stop loop length)
Jay
Verse and chorus?
I have a KMI Softstep.
How do I make pedal 2:
mute track 1 or stop (and reset to start) track 1 and start recording an new loop of desired length (pressing again to stop loop length)
Jay
A/B looper
A/B looper
Is there a way to make mobius like an A/B looper?
Verse and chorus?
I have a KMI Softstep.
How do I make pedal 2:
mute track 1 or stop (and reset to start) track 1 and start recording an new loop of desired length (pressing again to stop loop length)
Jay
Verse and chorus?
I have a KMI Softstep.
How do I make pedal 2:
mute track 1 or stop (and reset to start) track 1 and start recording an new loop of desired length (pressing again to stop loop length)
Jay
Hacked By HeykLog-Scylla-LostHackTeam
samedi 2 avril 2016
Hacked By HeykLog-Scylla
Scylla Says:BİR ADMİN VARMIŞ SONRA BÖÖÖÖ !!!
HeykLog Says:Arkamdan konusmaya devam et, cunku karsima cikacak kadar büyük degilsin... :*
https://www.youtube.com/watch?v=T-3Fl7AjFbU
Scylla Says:BİR ADMİN VARMIŞ SONRA BÖÖÖÖ !!!
HeykLog Says:Arkamdan konusmaya devam et, cunku karsima cikacak kadar büyük degilsin... :*
https://www.youtube.com/watch?v=T-3Fl7AjFbU
Hacked By HeykLog-Scylla-LostHackTeam
Hacked By HeykLog-Scylla-LostHackTeam
Hacked By HeykLog-Scylla
Scylla Says:BİR ADMİN VARMIŞ SONRA BÖÖÖÖ !!!
HeykLog Says:Arkamdan konusmaya devam et, cunku karsima cikacak kadar büyük degilsin... :*
https://www.youtube.com/watch?v=T-3Fl7AjFbU
Scylla Says:BİR ADMİN VARMIŞ SONRA BÖÖÖÖ !!!
HeykLog Says:Arkamdan konusmaya devam et, cunku karsima cikacak kadar büyük degilsin... :*
https://www.youtube.com/watch?v=T-3Fl7AjFbU
Inscription à :
Articles (Atom)
