I need a bit of help- I am installing a new umbilical cord a 7way... I have all the wires ran into a junction box from there each wire goes on to the running/stops/turns etc. My question is (are):
10g- black from 7 way goes to batt+ ?
10ga. white 7 way goes to batt- ?
Does the green wire which is running lights connect to a + line into the 12v side of the PD4045?
Does the ground wire of the same running lights ( not using body as a ground) go to the neg terminal block which then feeds to the - batt.?
Same wiring for every other line?
Thanks for any help you can give.
10g- black from 7 way goes to batt+ ?
10ga. white 7 way goes to batt- ?
Does the green wire which is running lights connect to a + line into the 12v side of the PD4045?
Does the ground wire of the same running lights ( not using body as a ground) go to the neg terminal block which then feeds to the - batt.?
Same wiring for every other line?
Thanks for any help you can give.
0 commentaires:
Enregistrer un commentaire